Cage for a decorative rabbit: schemes and drawings and how to do it yourself

Rabbits are quite cheerful animals. Therefore, a cage for an active decorative rabbit is selected quite spacious and safe. Given the choice of building materials, it is easy to assemble the structure with your own hands. Or you can take advantage of the range of pet stores that offer a wide range of cages assembled from various materials.

The main requirements for a cage for decorative rabbits

Basic design requirements: the walls and ceiling are made of metal mesh, the animal must not slide on the floor, so the coating must be rough.For safe and convenient movement, the doorway is equipped with a removable wooden bridge-ladder. An interesting solution - multi-storey structures.

Dimensions and design drawings

To limit the movement of a dwarf rabbit, it is recommended to combine a compact cage with an aviary. Or they choose a spacious structure 0.8-1 m long, 0.6 m high, 0.5 m wide. Often two-story structures are assembled for pets.

The construction scheme is simple: a tray, a bowl and a drinker are placed on the first tier. The second tier is made as free as possible, and the mink house is attached at the end. Such designs are especially practical, since they take up little space in the apartment and provide room for the animal to move around.

Choosing a location

When choosing a place for a cage, you need to take into account the characteristics of the pet's body. Rabbits are quite capricious - they react poorly to cold, and are also susceptible to drafts and overheating.Therefore, the structure is not placed near heating appliances and radiators, under air conditioners. It is not advisable to leave a rabbit's dwelling in the hallway or in the kitchen. The best option is in the living room, not far from the window.

How to make a cage for a decorative rabbit with your own hands

If you have the necessary tools (drill, pliers, metal scissors, hammer, hacksaw) and materials (plywood, metal mesh, wooden slats, nails), then it is easy to assemble the structure of the desired size. Milestones:

1. Two bottoms (60x90 cm) are cut out of plywood, the back wall - with parameters 90x50 cm.
2. Frames are assembled from wooden slats, on which the walls of metal mesh are fixed.
3. The rear plywood wall is attached to the base using metal corners, then the side walls.
4. The second tier is assembled in the same way. Install a ladder on the second tier.

The final stage of the assembly - the door is fixed on the hinges. The bottom is covered with linoleum or a piece of plastic.

Important! In order not to make a mistake with the parameters, they first draw up a drawing.

Cage Arrangement

Special devices will ensure the comfort of the animal and the convenience of caring for it. A tray, a drinking bowl, a bowl for food, a mink house are placed in the cage.

Feeders

It is recommended to equip the feeding place with ceramic bowls with a thick bottom so that the pet cannot turn them over. The best option is a deep bowl into which it is convenient to pour feed and put vegetables and fruits. Or the container is fixed low on the wall. For dry or green food, a separate tray is installed or a special nursery structure is fixed on the wall of the structure.

Drinkers

To make it easier to keep the cage clean, an automatic drinker in the form of an inverted bottle equipped with a valve is fixed on the wall. Not all pets can be taught to drink from such a drinker. Therefore, an alternative is a traditional bowl 5-7 cm deep. It is advisable to equip a place for a drinker away from the feeder so that the rabbit does not pollute the water when spreading food.

Tray

It is recommended to choose a plastic product that is easy to clean and wash. Manufacturers offer triangular-shaped containers 10-12 cm deep, which can be fixed in the corner of the cage. They also use a regular rectangular tray with a slatted bottom and a tray. Most often, a special cat litter is poured into the container. You can teach your pet to use the toilet with finely chopped paper or napkins.

Shelter

Every pet needs a nook where they can hide or rest. Usually they install a house inside a spacious cage. The original solution is to fix the mink shelter on the outside of the cage, while the inner area of the structure remains free.

Litter

The bottom of the cage should not be slippery. Not the best option - a hard surface or a metal grill. Some owners pour a layer of sawdust into the cage. In this case, it should be borne in mind that accidentally wet particles will stick to the paws of animals. A practical option is to lay a piece of dense fabric on the bottom, which is easy to pull out and wash, or linoleum.

Possible problems

A rabbit needs a well-ventilated home. Therefore, variants of cages with plastic walls are not suitable. The cage should be high enough so that the rabbit, standing on its hind legs, can freely straighten its ears.The design should have enough space to highlight areas for feeding rest, toilet.

It is not recommended to choose products with enameled metal elements, since the rabbit is able to chew on the coating. If there is no separate door on the second floor, then it will be problematic to get a rabbit.

Approximate cost of finished products

Budget options for cages made of galvanized mesh (with parameters 59x36x31 cm) cost 3-4 thousand rubles. The construction of the same form, assembled from wooden elements, is estimated at 10 thousand rubles. More spacious structures are valued higher (parameters 102x52x40 cm) - about 6 thousand rubles. A spacious cage with a plastic base, equipped with bowls, a drinker and a small house, is estimated at 7 thousand rubles.

When choosing a design, it is not recommended to focus on the age of the animal and buy a small cage for the rabbit. The pet will grow up very quickly. Therefore, it is advisable to immediately choose a model that is spacious and comfortable for the pet, which will be convenient to clean.

Recommended