Spruce Glauka Globoza on the stem: description of the prickly variety, planting rules and care

Glauka Globoza is a dwarf wide-conical spruce, which was obtained in 1937 from seedlings of the spiny variety. At the same time, in 1955, it first went on sale. Spruce Glauka Globoza, grown on a bole, looks especially decorative. The culture is characterized by an unusual appearance, which allows it to be actively used in the landscape design of many European countries.

Description of the tree

Prickly spruce Glauka Globoza is a dwarf form that does not exceed 2-3 meters in height. In this case, the diameter of the crown is 2 meters.In a year, the plant grows by 8 centimeters in height and 10 centimeters in width. The young plant has a loose cushion crown. After some time, it acquires a spherical or wide-conical shape and a high density.

The plant is characterized by dense prickly needles 1-1.5 cm in size. It has a rich silvery blue tint. The cones are elongated and brown in color. They hang beautifully from the branches. Ripening and falling off of cones is observed in the first year. The plant is considered undemanding to the composition of the soil and is highly resistant to frost. The culture is very resistant to drought, smoke and dust. This allows it to be grown in urban areas.

Planting and care

When planting thorny spruce, it is important to avoid soil compaction and moisture stagnation. When choosing a landing site, it is important to give preference to areas away from groundwater.Be sure to provide a drainage layer of sand and crushed bricks. Its thickness should be 15-20 centimeters. When planting fir trees in groups, the distance between them is 2-3 meters. The depth of the landing pit is 50-70 centimeters.

When planting a crop, it is important to ensure that the root collar is at the same level with the ground. In order for the tree to develop better, it is recommended to make a special substrate. To do this, you need to mix leafy soil, turf, peat and sand in a ratio of 2: 2: 1: 1. Immediately after planting, the tree needs to be watered abundantly. To do this, use 40-50 liters of water. It is also desirable to feed the culture. To do this, you can add 100-150 grams of nitroammophoska or make a solution of 10 grams of Kornevin and 10 liters of water.

Caring for a tree is easy enough. In the first months of life, it should be watered frequently, but moderately.Thanks to this, the culture will be able to take root faster and grow greens. Seedlings less than 3 years old are watered with 10 liters 4-5 times during the summer. It is enough to moisten adult plants 3 times.

To maintain the permeability of the soil for moisture and air, the soil around the seedlings should be periodically loosened. This is done a day after watering. At the same time, it is recommended to get rid of unwanted vegetation.

So that the earth in the near-trunk circle does not dry out, it needs to be covered with a mulch layer. For this, it is permissible to use peat or coniferous sawdust. To make the plant look more decorative, it should be periodically fed. For this, it is recommended to use nitroammophoska - 30-40 grams per 1 square meter. You can also use the drug "Kemira-universal". To prepare the solution, it is worth using 20 grams of the product per 10 liters of water.

To form a beautiful tree on a trunk, it takes several years to cut the shoots at the bottom of the trunk into a ring. At the same time, the top is cut by 2-3 centimeters.

Application

Culture on the bole looks very decorative. Therefore, it can be used for single landings or small groups. The plant is also used to form hedges, balls, pyramids and other shapes.

Spruce Glauka Globoza may well be grown on a bole. This culture looks very unusual and fits perfectly into a variety of compositions. In order for a tree to retain its decorative effect, it must be properly looked after.

Recommended