Animals

How to catch a rabbit: the best ways and instructions for making traps

Anonim

Rabbits are notorious for their fearfulness, so owners of furry animals often face the problem of their escape. Catching an eared beast is not an easy task, but there are several ways that make this process easier. Fishing in the forest and in the garden has its own characteristics. Here are a few methods on how to catch a runaway rabbit on your own.

How to catch a runaway rabbit

The stress state of the animal is easy to determine by external signs: the rabbit begins to stand up on its hind legs, stretching out its ears, and looks around warily. Or a big-eared animal clings to the ground, knocking with its hind legs.This behavior signals that the shy creature is frightened and ready to run away at any second.

To prevent your pet from trying to escape, you should pay attention to his behavior. In case of fear, eliminate the factors that provoke the stress of the animal. They can scare him:

  • appearance of a new animal in the house;
  • loud sounds;
  • sharp movements.

In case of fright and escape, the pet does not need to run after him. This can scare him even more. It is enough to lure a rodent to the cage by putting your favorite delicacy there.

If the animal took flight in the absence of the owners, it is advisable to think over the trajectory of its movement before searching for the pet. Perhaps the animal is hiding somewhere in a secluded place. He usually tries to find familiar places when trying to escape. In case of detection, you need to slowly approach the fluffy pet, bend over and try to calm down by talking and stroking.You should never make sudden movements, take the animal by the scruff when it does not see it.

Catching a rabbit in the garden or garden

Catching a fluffy animal in the garden is somewhat more complicated, since the territory of the site for the animal to perform maneuvers increases significantly. Once in the garden, the rodent becomes the main pest: it eats the leaves of trees, shrubs, crops. It is useless to run after a rabbit in a personal plot, so only the animal will be more frightened, and the owner will lose strength in vain.

In order not to harm the rabbit, it is enough to follow a few rules:

  1. Preliminarily assess the situation, study the traces left by the beast on the site. Usually, a pet out of habit chooses a place to hide in the bush area.
  2. Having calculated the location of the pet, put up a cage with a feeder, put the rabbit's favorite treat in it.
  3. The animal is lured with food, laying out a path of pieces of treats leading to the house.
  4. Food is laid several times a day so that the pet gets comfortable and feels confident near the cage.
  5. If attempts to catch an animal are unsuccessful within a week, the house with food is moved to another place.

How to catch a wild specimen with your own hands

Catching a wild animal in its natural habitat is extremely difficult. An animal that has evolved over the entire period of development has learned to adapt in the wild and hide from danger.

Race for the eared beast will only lead to a loss of time and energy. To catch him, you need to make a trap. To do this, use one of four options for making a trap.

Silky

To make a standard trap, you need 1-1.5 meters of brass wire.A loop with a diameter of 5-7 centimeters is twisted from it. To do this, it is bent closer to the edge, making 5-6 turns around the long part. The long end of the wire is threaded into a loop, twisted in a similar way. A strong rope is passed into the ring, fixed on a tree.

Prepared snares are installed in natural arches in places where the fluffy beast most often lives. To do this, they find a rabbit path - the area where the animal most often runs. In the absence of a natural arch, it is made independently by pruning branches. The loop is placed 10-15 centimeters from the ground. On the sides, they cover the trap a little with branches so that the rabbit does not sense danger.

Wolf Pits

The easiest way to catch a wild animal is to dig a hole. The trap is being prepared at the site of the rabbit trail. Dig a hole 0.7 meters wide, at least one meter deep. On top of the trap, thin branches are laid crosswise, hiding them under a layer of leaves and earth.Camouflage should be done as close as possible to the natural habitat. Bait is placed in the center of the trap: vegetables, corn.

When installing the trap, you do not need to check and trim it too often, otherwise the human smell remains on the parts. It might scare away rabbits.

Eared rodents are not particularly smart, so their capture is not difficult. It is enough to be patient and wait for the animal to fall for the trick.

Cells

Considered the most humane way to catch a wild animal, as the risk of injury to the animal is minimized. To catch a rabbit in this way, they buy a ready-made cage or make it yourself.

The principle of the trap is as follows: when the victim gets inside the cage to eat, the cage slams shut under the weight of the animal, and the animal remains locked inside.The food is placed on the trap mechanism, otherwise the rabbit will have lunch and calmly leave the cage. The mechanism is activated by lifting the door up. Check the operation of the product with a long stick. If everything works properly, set the trap in the chosen place.

With box

Using a cardboard box is considered the most affordable, but less reliable option when hunting for a furry animal. The process consists of several stages. First, prepare a box with a width of at least one meter. The bottom is cut out. Then they prepare a thin branch 1.2 meters long, tie it to the stump with one end, and the other - to the ledge.

Two holes are cut out in the box through which the twine is passed. Its ends are tied together. An ordinary thread 4 centimeters long is tied to the center of the branch, connected to twine. Hang the box at a height of 1 meter. Two additional holes are made in its upper part. A piece of twine is passed through them.One end is tied to the center of the previous rope, the other is left to hang down.

Tie a rabbit treat to the free end of the twine. Jumping up to eat, the eared beast pulls the rope, which breaks and the box falls. Thus the animal is trapped.

Helpful tips

To easily catch a pet or a wild animal, just follow simple recommendations:

  1. Eared rodents have an excellent sense of smell, so they smell the human smell from afar. When capturing an animal, you need to approach it carefully, without sudden movements and aggression.
  2. Rabbits are very fast animals that can develop good speed. To make it easier for yourself during fishing, free space is reduced. To do this, they set up obstacles so that the rabbit cannot move on.It is much easier to catch a pet in a small area.
  3. If attempts to catch a rodent were unsuccessful, in this case a specialized service will help.

In the capture of a fluffy animal, it is not strength that matters, but intelligence and ingenuity. Only cunning can catch an active animal in the garden or in the wild. The main thing in the process of hunting is not to harm the rabbit.