DIY rabbit cages: 20 drawings with dimensions, assembly video

You can make cages for domestic rabbits with your own hands. True, for the construction of a dwelling for animals, you will need wooden boards and a metal mesh with a small cell. The construction of the structure begins with a frame, which is sheathed with wood or braided wire. If the animals are planned to be kept outside all year round, they make the most closed wooden cages.

Choosing the cell location

Pets must be kept in a special non-residential premises, in which the temperature is maintained from 10 to 20 degrees Celsius all year round, there is light, windows, doors, ventilation.Rabbits are usually kept in cages. It is undesirable to place animals on the street, in the wind or draft.

Cages are portable and stationary. They can stand along the wall, in the middle of the room, in one, two, three tiers. The main thing is to provide free access to them. Cages are installed on wooden, metal risers or shelves, racks at a height of 50-80 cm from the floor in one, two or three tiers. The structures themselves should be free, durable, easy to maintain, not retain urine and feces. The optimal value is 0.5 square meters. meters of area per adult animal.

What tools and materials will be needed

Home for domestic rabbits can be made from wooden boards, plywood, chipboard, plastic, metal mesh with a small cell, drywall. In the process of work, you may need thin tin for sheathing, a metal profile, a profile pipe or strong wooden slats for building a frame. In order to make a design, you need some tools: a grinder, a drill, a hammer, nails, rivets, self-tapping screws, screws, a tape measure or a ruler.

Important! Before you buy materials for building a cage, you need to choose a model, draw a design diagram, and determine its size.

Dimensions and Drawing

One cage can contain one or more rabbits. The size of the structure depends on the number of animals, their breed and the age of the animals.

For adults

When building a dwelling for large rabbits, first draw a model or draw a diagram, according to which one animal has at least 0.5 square meters. meters of area. A single cage should have the following dimensions: length - 0.7-1.4 m, width - 0.5-0.7 m, height - 0.5-0.6 m. A self-made structure for males or females is placed at a height of 50 -80 centimeters from the floor on special risers or shelves.

To save space in the room, you can make two-tier and even three-tier cages.

For the construction of a structure in 2 tiers, a drawing is drawn corresponding to two cells located one above the other. Between adjacent tiers leave a gap of 15-30 cm for the pallet. The total height of this design is 1.5-2 meters. Dimensions of one cage: length - 0.8-1.4 m, width - 0.7 m, height - 0.6 m. Distance to the floor - 50-70 cm.

For youngsters

Rabbits under the age of 1 month are kept in the same cage with their mother. Then they are transferred to self-feeding and transplanted into a more spacious box.For one small rabbit, you need 0.12-0.17 square meters. meters of area. Rabbits are usually kept in multi-seat, that is, group cages. The most convenient for breeding animals on the farm are designs designed for 7-10 young individuals. Such cages can have the following (optimal) dimensions: length - 1.7 m, width - 0.7 m, height - 0.6 m.

For giant rabbits

Adult animals of large breeds are kept in single boxes. Home-made designs usually have at least 0.7 square meters. meters of area. The optimal dimensions of the rabbit cage: length - 1.5 m, width - 0.8 m, height - 0.8 m.

For a female with cubs

For a rabbit with rabbits, it is recommended to build spacious housing of such dimensions: length - 1.2 m, width - 0.6 m, height - 0.6 meters.There are designs with a nesting and aft compartment, fenced off from each other by a partition with a round hole. The dimensions of such a structure: length - 1.7 m, width - 0.6 m, height - 0.6 meters.

How to make a cage for a rabbit with your own hands

In large farms, rabbits are usually kept in metal mesh cages without bedding, inside which they equip a feeder and drinker. Ready-made designs are sold in stores. They are designed for 1-2 rabbits. These cages have a metal mesh top and a plastic or tin tray. They cost about 50-100 dollars. You can make your own housing for your animals from improvised materials.

Video dimensions:

Wooden

Cheapest cost construction of wooden boards. Hard wood (oak, maple, beech) is suitable for its manufacture. The wooden crate should have a mesh door or metal mesh front to provide fresh air to the animals. In such a cage, rabbits will be warm and comfortable even on the street, but you will have to build a roof on top. True, the wooden floor is difficult to clean from the remnants of feces, it quickly begins to rot under the influence of urine.

Step-by-step instructions for making a cage:

• frame is made from bars of a certain length;
• sheathe the base on three sides with boards;
• floor can be made from slats and leave a gap of 1 cm;
• it is desirable to make a hinged roof;
• a door is installed in the front wall;
• mesh is nailed to the front wall or to the door.

You can build a structure where the entire front wall is a mesh door. A metal mesh is nailed to a wooden frame. A feeder can be attached to the door. Such a device will help keep food clean and remove spoiled food in time.

From metal profile

In addition to wood, metal elements can be used to make rabbit housing. True, such products have not only advantages (cheapness, ease of care), but also disadvantages.Mesh metal cages are not suitable for the street. In the open air, such structures will quickly begin to rust. In addition, the grid heats up a lot in the heat, and instantly cools down in a hard frost.

For a metal mesh cage, you first need to make a frame from rails, for example, from a metal profile, and then sheathe it with a mesh with the smallest cell. You can build a combined structure of wood and metal. The walls and roof can be wooden, the floor and doors are made of metal mesh.

Important! You can build a rabbit house using drywall or plywood as partitions or walls. In any case, it is better to make the frame of the future structure from a metal profile. The metal profile is easy to bend, can be connected, mounted at home.

From profile pipe

Dwelling for pets can be assembled from various improvised materials that are on the farm. First you need to build a frame. The strongest base is obtained from a metal profile. True, to connect the rails you will need a welding machine.

The frame is sheathed with wooden boards, metal mesh or plywood, drywall. Durable wooden construction suitable for outdoor animal keeping. If a metal mesh was used for construction, then it is better to put such housing for rabbits indoors. In tips for beginner rabbit breeders, you can find recommendations that it is easier to make a rabbit cage from wooden materials.

Arrangement of the cage inside

Housing for rabbits can have one spacious room or two sections: feed and nest. If the nesting compartment is not fenced off in the cage for females, then a mother liquor is placed in it, that is, a closed plywood box with a hole with a diameter of 30 cm. These items are made from plastic, wire, sheet metal, or wood.

True, thin plastic animals will quickly gnaw through, it is better not to use it.

Feeders are installed near the door, the front wall or hung from the front partition. For hay, they buy or make wire feeders on their own, which they take out beyond the perimeter of the cage, that is, they hang them on a door or a side, front wall. Drinkers are also attached to the front mesh partition. You can buy ready-made water supplies at the hardware store. For example, vacuum or nipple drinkers for rabbits.

There should be enough space in the cage for the activity of the animal. Some craftsmen make multi-tiered structures for their pets. They build a nest at the top, and below they make a feeding area with a spacious area for walking. You can keep the rabbits in wooden boxes in a warm room in the winter, and in the summer you can move them outside to a portable netting pen where they will eat pasture.

Interesting ideas for unusual cells

If you wish, you can build a real house for your animals with several rooms: a bedroom-nest, a kitchen-feeder and a huge living room, that is, a place for walking. Some craftsmen make bunk structures for rabbits. In the lower tier, instead of a floor, there is green grass, and the walls are made of a frame sheathed with mesh. Upstairs is a wooden closed box for sleeping. Animals climb to the second floor on an inclined board-ladder.

A cage for your animals can be made in the form of a village house, where the balcony is a feeder for hay and grass, and the windows are mesh openings in the side walls. From above, such a house should have a roof covered with waterproofing roofing material. In winter and summer, this design can stand on the street.

A cage with an animal can be made from solid wooden materials and put on a raised platform near the fence. Doors are best made from mesh. On a flat roof, you can put flower pots or a tray with smelling plants (dill, parsley, celery) that rabbits love so much.

Recommended