Burenka milking machine: how it works, instructions for use and price

For quick collection of milk from cows, it is advisable to use the Burenka mobile milking machine. To work with this device, one operator is enough to interact with the entire herd. It will be useful to a farmer who has more than 5 animals. The milking rate is 1 liter per 1 minute. Therefore, cattle will not get tired and will quickly get rid of milk.

Design and principle of operation

The Burenka milking machine has proven itself well in farms with a small number of livestock (10-15 individuals).It is compact and economical in terms of power consumption. Ease of use allows one person to perform all the necessary manipulations with the animal, without involving third-party assistants.

The device consists of:

• support frame, to which the wheels are attached, which makes it easy to transport the machine;
• vacuum sensor, which indicates the pressure indicator;
• an oil-type piston pump that operates by the movement of an electric motor and creates a vacuum;
• receiver;
• vacuum regulator to monitor pressure;
• tubes that will collect and express milk;
• vacuum hoses;
• pneumatic pulsator;
• teat tips presented as cups;
• milk containers.

In fact, the basis of the milking machine for cows "Burenka" is a motor that makes the piston system work. Air is injected, which enters through rubber tubes to the glasses. At this time, the cuff is compressed, which tightly grasps the nipple and stimulates the milking process.

When the piston returns to its original position, the air that is in the glass enters the air line and exits. The cuff, initially pressed against the nipples of the animal, departs to the outer walls. At this point, the absorption process begins. Through the tubes, milk enters a specially designated container.

The rest phase occurs only when the pressure in the glass normalizes, and it can be adjusted independently.

Specifications

The machine "Burenka" can be used not only for milking cattle. It also fits under a goat's udder. The glasses of the device massage him and artificially irritate the nervous limbs, which speeds up the process of milk production.

The milking machine is:

• equipment weighing 51 kilograms;
• milk container in the form of a stainless steel can, designed for 25 liters;
• device with a power of 550 watts and a pressure of 50 kilopascals;
• dimensions 700800900;
• pulse frequency 60-64 cycles.

Manufactured by Elektromash from Nizhny Novgorod.

Advantages and disadvantages

Pros and conscapacious can;piston system that will not break when milk gets inside;ease of transportation;compactness;elasticity of suction cups;quality hoses.device weight;noise at work;lack of space for fixing the power cord;milk yield instability.

Farmers can't always express all their milk. This is one of the essential problems of the equipment.

Using the Burenka apparatus

Before milking a cow, you need to take care of her personal hygiene: clean the animal from dirt, wash and massage the udder, wipe and dry the teats. Milking equipment is also being prepared. It is washed after each procedure under water, while the device must be turned on, then dried. The inner glasses are disinfected before use. For cows, the absence of discomfort and dirt is important. Therefore, the operator must also have a clean coat and hands.

When using the milking machine you must:

• check the entire system for connections;
• tightly close the can lid;
• bring glasses up with holes;
• turn on equipment;
• adjust pressure;
• clamp the milk tube, then put the glass on the cow's udder;
• open the tap for milk to enter the container.

If everything is done correctly, the farmer will receive all the milk without loss.

Where to buy and how much it costs

The Burenka milking machine can be purchased in the online store. The cost of the device depends on its modification. The most inexpensive model costs about 23 thousand rubles.

Recommended