Plastic bottle beds: pros and cons and how to make your own

Plastic bottles remain in every household after use. You don't have to throw them away, you can put them to good use. Consider the creation of beds from plastic bottles, their pros and cons, what types of beds can be made. What tools and materials are needed, the manufacturing sequence, how the beds should be designed. What advice do the pros give.

Pros and cons

Advantages of garden beds made of plastic containers:

• completely free, no need to spend money on material;
• plastic resistant to moisture, sun, fungus, bacteria, does not decompose in the ground;
• ease of arrangement, minimum additional materials required;
• easy to repair and disassemble;
• bottle fence will keep weeds away;
• from bottles you can build beds of any configuration;
• the design does not erode, does not crumble.

Disadvantages of bottle beds: fragility, sand is poured into bottles to give strength.

Types of beds

From bottles you can create various compositions. The simplest are ordinary rectangular beds, but you can also lay out flower beds of various shapes from bottles, which are difficult to create from other materials.

Fence of dug bottles

The simplest design can be built by digging bottles into the soil in the shape of a square or rectangle. To create simple ridges, you should choose bottles of the same size and type. It is recommended to use bottles of 1.5-2 liters.

Their color can be uniform, but you can also collect material of any color and lay out multi-colored mosaic structures from it. Before installation, prepare the bottles: rinse them from the remnants of the contents, remove the labels, and dry. Then pour half the sand through the neck to create stability in the future bed.

Production order: on a site cleared of weeds, install pegs at the corners of the planned structure and connect them with a rope. Using a rope, dig trenches as wide as the width of the bottle and at least 10 cm deep. Place the bottles in the trenches one next to the other so that they hold tightly.

Raised beds

Building vertical bottles can save space in a small garden. Strawberries or medium-sized flowers are usually grown in such ridges. As a support for the structure, you can use the wall of the building, a mesh fence, a shield of wooden boards, or something similar.

How to make high ridges from plastic leftovers: cut off the bottom of the bottles, make a 3 mm hole in the cork. In the middle, cut a window in which the plant will be planted. Fill the area near the plug with drainage material, pour earth on top. Attach the bottles one above the other with their necks down.

High beds can be built in another way, for their device you will need a hot soldering gun. The top and bottom parts of the containers are cut off, the middle parts are connected and soldered together so that a long pipe is obtained. It is attached to a vertical support. A drainage pipe is inserted inside, through which watering will be carried out, covered with soil.Then windows are cut out in the plastic at the same distance, where the plants will grow.

Canopy of plastic containers

From bottles you can make hanging pots in which to plant annual flowers. You can place the pots upside down or upside down, pierce in the upper part and from 2 sides and stretch a wire or rope through them. Cut out a large through window in the middle part of the containers, pierce several holes in the bottom to drain water.

Pyramidal structures

For the construction of the ridges, you will need a frame made of wooden beams in the shape of a pyramid. Bottles of 5 liters are installed on the structure, windows are cut out from one side, covered with soil and plants are planted.

Tools and materials

Plastic bottles take 1.5-2 liters and 5 liters, depending on the purpose of the design. Containers must be prepared, washed from the remnants of drinks. To pierce plastic, you need a hot wire. To create beds - ropes and pegs, shovels and rakes.

How to make beds from plastic bottles with your own hands

There is nothing difficult in making beds from plastic containers. The variety of forms is limited only by the gardener's imagination. From the bottles, ridges of a simple or complex geometric shape can be obtained. One person can cope with the creation of ridges, the main thing is to properly prepare and install the containers.

Design Ideas

Children love everything interesting, so for them you can make pots for flowers in the form of cars, trains, a pig out of plastic containers. Cut a wide window on the side of the bottles, put it on the other side on the ground. To give a resemblance to an animal or a car from cartoons, in the front of the containers you can make eyes from corks, wheels - from flat bottoms.

Plastic bottles to give beauty to the beds can be painted in several different colors. Pour liquid paint into the middle of the containers, close with a cork and shake. Open the cork and pour out the excess. Cut the containers, pour colored stones on the bottom, close the cork, bury the bottles upside down.

Pro Tips

Plants for growing in plastic containers should be chosen so that they have enough space for nutrition and development. Usually these are small early vegetables and flowers.

Be sure to make holes in the bottom of the containers so that the remaining water flows through them. The soil or substrate should be chosen fertile, light and loose, without weed seeds.

Ridges of plastic bottles are often made by gardeners on their plots. Finding material for a simple structure is easy. Plastic beds will be not only practical, but also an original decoration of the garden plot.

Recommended