Panther herbicide: instructions for use and consumption rate

Weeds are the eternal problem of all gardeners and farmers. Everyone fights them as they can and wants, but often these actions do not bring the desired effect. To permanently get rid of cereal weeds, it is recommended to use Panther herbicide. About its properties and rules of use, as well as compatibility with other drugs, we will describe below.

Composition and release form of herbicide Panther

Produced by the manufacturer in the form of an emulsion, which is convenient to dilute with water, use for home and industrial purposes. The substance is packaged in 5-liter plastic containers and 100-ml bottles.

The active ingredient is quizalofop-P-tefuril. Each liter of herbicide contains 40 grams of active ingredient. As additional components, additives are used that improve adhesion to plants.

Pantera is a low toxicity chemical with a minimum application rate per hectare. Once in the ground, it does not accumulate and after 7 hours after spraying it breaks down into non-toxic components.

Has a third hazard class, therefore, requires compliance with the necessary transportation rules.

Good and bad sides

Panther is in high demand because:

• good at destroying weeds belonging to the cereal family;
• begins to work an hour after spraying;
• quickly infects the root of the weed, preventing its vegetative reproduction;
• weeds cannot develop "immunity" to it, so the same areas can be repeatedly treated with a herbicide;
• it adheres reliably to weeds, it is not washed away by rains;
• development of cultivated plants does not affect its use;
• sold in an easy-to-use container.

Panther will not cope with mold and microscopic fungi, will not be able to infect dicotyledonous and monocotyledonous weeds. The tool has a narrow spectrum of action, therefore it is effective only in the fight against cereal weeds. This is its main drawback.

How the drug works

Having hit a plant, Panther begins to penetrate into its tissues, spreads through it and inhibits its subsequent development. Its growth stops immediately after contact with the herbicide, and the full result of spraying is visible already on the fourth day.Weeds die off completely within three weeks after the procedure.

Substance suppresses cereal weeds. It acts only on plants that have already grown at the time of spraying. Therefore, if necessary, the procedure must be repeated.

Calculation of the consumption of weed control

Consumption rate of herbicide solution - 400 liters per 1 hectare. To process one hundred square meters, you need to dilute 10 g of the substance in 10 liters of water, mix well and spray the beds with vegetable and root crops with the resulting solution. The leaves of the plant must be completely moistened.

Important! It is forbidden to increase the recommended dosage, as this may adversely affect the growth and yield of cultivated plants.

How to prepare a working solution

The success of its application depends on the correct preparation of the working solution, so you need:

1. Fill the sprayer tank halfway with water, slowly add the required amount of herbicide and mix everything well so that it dissolves completely.
2. The container in which the herbicide was diluted, rinse with water and pour into the tank.
3. Add the missing amount of water to the tank, stir and screw the lid on carefully.

During the application it is better to use boom sprayers as they better distribute the chemical to the plants.

Conditions for increasing the effectiveness of the procedure:

• weeds that are in the phase of two true leaves need to be treated;
• there should be a lot of weeds;
• optimal weather conditions (windless cloudy day, evening or morning).

Herbicide instructions

For your convenience, we provide a clear user guide.

In phase 4 leaves0.07-0.1 ml per 1 m²

Culture	View	Apply time	Dosage	Number of treatments	Herbicide duration
Potatoes, tomatoes, beets, onions, cucumbers, white cabbage, rapeseed, sunflowers	Annual cereals			1 time	45-60 days
	Perennial cereals	When plants are 15 cm high	0.1-0.15 ml per 1 m²

Requirements for the safety of work

Safe use of the Panther suggests:

1. Preliminary careful study of the attached instructions.
2. Mandatory use of personal protective equipment.
3. Without nicotine, food and water while working.
4. Spraying at the right time under optimal weather conditions.

The procedure should not be performed on minors, people with contraindications for he alth reasons, pregnant and lactating women.

Compatibility with other substances

Panther works well with many herbicides designed to kill dicotyledonous weeds. The exception is drugs with an alkaline reaction. If it is necessary to mix different herbicides, it is recommended to check their compatibility: both substances are mixed in small amounts in water. The absence of sediment confirms that they interact well.

Practice proves that Panther can be mixed with herbicides:

1. Lornet.
2. Betaren.
3. Caribou.
4. Mitron.

Expiration date and storage conditions

The manufacturer claims that the Panther retains its basic features for three years from the date of manufacture. The product is best stored indoors at + 5-25 degrees. Shake the herbicide well before use.

Herbicide analogues

Besides Panther, you can use to kill weeds:

1. Greenforth.
2. Lemur.
3. Fusilade forte.
4. Anti-wheat.
5. Arista.

These herbicides are analogues of Panthera. They immediately begin to destroy weeds, while not having a negative impact on cultivated plants.

Result

Following the practical use of the Panther, you can easily destroy annual and perennial weeds and get a good harvest.

Recommended